S86.10-2500-06
1 Retaining pin
2 Seat console
3 Side paneling
4 Rear cutout
5 Front cutout
6 Fire extinguisher mount
7 Expanding clips
8 Holes
9 M6x15 Philips screw
10 Washer
11 M6 self-locking nut
| Removal | ||
1 | Remove battery | ||
| |||
2 | Remove expanding clips (7) | Press retaining pins (1) from outside to inside of seat console (2) with suitable tool. | |
3 | Remove side paneling (3) | ||
| Installation | ||
4 | Complete cutouts (4, 5) | Do not scratch or damage side paneling. | |
5 | Install side paneling (3) | Installation: Ensure that expanding clips (7) are seated properly in console. | |
6 | Retrofit fire extinguisher mount (6) | Fasten fire extinguisher mount in present holes (8). Install screws (9) with washers (10) from outside and nuts (11) with washers (10) from inside. | |
7 | Install in opposite order | Steps 2-1 |