an8285s001501e

Retrofit antenna module for Audio 40 with digital radio (DAB)

Typ an · temat 82.85 · wersja 0100 · 2018-12-22

Dotyczy: Model 447.6/7 with code JF1 (rain sensor)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 447 (modele 6**, 7**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.3 Pofabryczny montaż/przebudowa — Seria 447 (modele 6**, 7**)

AN82.85-S-0015-01E

Retrofit antenna module for Audio 40 with digital radio (DAB)

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Model

447.6/7

with code JF1 (rain sensor)

Retrofit antenna module for Audio 40 with digital radio (DAB)

S82.85-4616-08

1

Loosen tape (1) at right A-pillar and detach electrical plug (2).

2

Attach antenna module (3) to right A-pillar and fasten with integrated screw.

3

Connect electrical plug (2) to antenna module (3).

4

Route electric line for antenna module (3), as shown, from right A-pillar, inside instrument panel up to installation location of audio 40.

Do not kink electric line and ensure that it is routed without any chafing.
This will prevent damage occurring.

5

Secure electric line for antenna module (3) section by section using cable ties at factory-installed electrical wiring harness.

6

Connect plug holder (4) to antenna module (3).

The contact socket (5) of electric line for antenna module (3) is connected when installing audio 40.

Powiązane dokumenty