1 | Remove connector housing from CAN B connector (2) and microphone connector (3), and replace with new connector housings from supplied parts kit. |
1 | Adapter wiring harness |
2 | CAN B connector |
3 | Microphone connector |
4 | USB/AUX connector |
5 | Head unit connector |
6 | Antenna plug |
7 | Connector socket |
8 | Central connector |
S82.60-4649-11
S82.60-4650-08
2 | Route adapter wiring harness (1), as shown, from the radio installation location (audio) (N87/2) in instrument panel up to the installation location for the overhead control panel or dome lamp. |
Do not kink adapter wiring harness (1) and ensure that it is routed without any chafing. |
3 | Secure adapter wiring harness (1) in sections using cable ties to electrical wiring harness available at the factory. |
Make sure that the adapter wiring harness (1) does not make contact with the front headliner (9). |
To do so, align the head unit connector (5) and the central connector (8) for connection to the radio (audio) (N87/2) and the USB/AUX connectors (4) for connection to the USB/AUX connection unit. |
4 | Install CAN B connector (2) into interior CAN (CAN B) potential distributor electrical connector (X301). |
5 | Route microphone connector (3) on adapter wiring harness (1) to installation opening of overhead control panel or dome lamp. |
Installation: The connection of the microphone connector (3) is described when installing the overhead control panel or dome lamp. |