Dotyczy: MODEL 207.3##/4## 1# up to 5/13/13 with TRANSMISSION 722.### 1# up to 5/13/13 without CODE 310 (Cup holder) MODEL 207.3##/4## 1# with TRANSMISSION 711.### 1# without CODE 310 (Cup holder)
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.20 Konsola środkowa — Seria 207 (modele 3**, 4**)
EinPAS 37 Wyposażenie wnętrza › 37.20 Konsola środkowa › 37.20.3 Pofabryczny montaż/przebudowa — Seria 207 (modele 3**, 4**)
Dotyczy też silników/skrzyń biegów: 711 ***, 722 ***
AN68.20-P-0002EC
Retrofit cup holder
18.06.2013
MODEL
207.3##/4## 1# up to 5/13/13 with TRANSMISSION 722.### 1# up to 5/13/13
without CODE 310 (Cup holder)
MODEL
207.3##/4## 1# with TRANSMISSION 711.### 1#
without CODE 310 (Cup holder)
1
Cup holder
2
Roller blind
3
Center console
4
Stowage compartment
P68.20-4187-06
Remove
1
Slide roller blind (2) of stowage compartment into center console (3) toward rear
2
Remove stowage compartment (4) from stowage compartment in center console (3)
The stowage compartment (4) is a dispensable part.
Install
3
Position cup holder (1) above guides (arrows)
4
Push cup holder (1) downward until it arrests audibly on guides (arrows)
5
Close roller blind (2) of stowage compartment in center console (3)
Check
6
Enter special equipment in online vehicle data card via vehicle documentation system (VeDoc)
Add: Code (309) Cup holder
7
Document retrofitted equipment through VeDoc
Attach note "cup holder retrofitted as per AN68.20-P-0002EC" under field organization texts for design group 68.
