Retrofit backup camera wiring harness in vehicle interior

AN54.65-S-0030-09EA

Retrofit backup camera wiring harness in vehicle interior



Assignment of right footwell firewall fuse and relay module

Model 447.6## 1# except code XM0 (Facelift) Model 447.7## 1# except code XM0 (Facelift)

GF54.15-S-1256-39TRA



Assignment of right footwell firewall fuse and relay module

Model 447.6## 1# with code XM0 (Facelift) Model 447.7## 1# with code XM0 (Facelift)

GF54.15-S-1256-39TRF

Model

447.6## 1#

with code W65 (Tailgate)

except code W50 (Rear-end door, double-wing, 180 degrees without window)

except code W54 (2-wing rear-end door, 270 degrees)

Model

447.7## 1#

with code D57 (Full-width partition wall on C-pillar with window)

with code V23 (Interior trim, premium version)

with code W65 (Tailgate)

with code ZK4 (Mixto)

except code W50 (Rear-end door, double-wing, 180 degrees without window)

except code W54 (2-wing rear-end door, 270 degrees)

Model

447.7## 1#

with code W65 (Tailgate)

except code V23 (Interior trim, premium version)

except code W50 (Rear-end door, double-wing, 180 degrees without window)

except code W54 (2-wing rear-end door, 270 degrees)

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

8.8

10.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

23

32

Phosphated

Nm

21

29

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

12.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

38

Phosphated

Nm

36

1

Vehicle interior electrical wiring harness

2

Power supply electrical line

3

Camera electrical line

4

Ground cable

5

CAN G electrical line

6

Radio electrical line

7

Fuse and relay module electrical line

17

CAN B electrical line

Shown on model 447.6 without code SH9 (Windowbag for driver and front passenger)

1

Vehicle interior electrical wiring harness

9

Power supply electrical line

2

Power supply electrical line

16

Ventilation scoop

3

Camera electrical line

W29/10

Right D-pillar ground point

4

Ground cable

X8/46

Right liftgate electrical connector 2

8

Camera electrical line

X8/57

Right liftgate electrical connection 4

1

Route vehicle interior electrical wiring harness (1) as shown from right D-pillar and top right roof paneling.

 Do not kink the vehicle interior electrical wiring harness (1) and ensure it is routed without chafing.
This prevents damage.

2

Fasten vehicle interior electrical wiring harness (1) in sections using cable ties to factory-installed electrical wiring harness.

3

Remove ventilation scoop (16) using  long wedge.

4

Unscrew nut from right D-pillar ground point (W29/10).

5

Route ground line (4) from vehicle interior through cable opening in right D-pillar to outside.

 Do not kink the ground line (4) and ensure it is routed without chafing.
This prevents damage.

6

Attach ground line (4) to right D-pillar ground point (W29/10).

7

Secure ground line (4) to right D-pillar ground point (W29/10) using nut   .

8

Install ventilation scoop (16).

9

Attach power supply electrical line (2) of vehicle interior electrical wiring harness (1) to power supply electrical line (9) of liftgate electrical wiring harness.

 This creates the right tailgate electrical connection 2 (X8/46).

10

Attach camera electrical line (3) of vehicle interior electrical wiring harness (1) to camera electrical line (8) of liftgate electrical wiring harness.

 This connects right liftgate electrical connection 4 (X8/57).

Shown on model 447.6 with code D51 (Full-width partition wall with 1 window) without code SH9 (Windowbag for driver and front passenger)

1

Vehicle interior electrical wiring harness

17

CAN B electrical line

4

Ground cable

K40/11

Firewall fuse and relay module

5

CAN G electrical line

X8/46

Right liftgate electrical connector 2

7

Fuse and relay module electrical line

X8/57

Right liftgate electrical connection 4

13

Partition wall

X301

Interior CAN (CAN B) potential distributor electrical connector

14

Front headliner

X304

Front end CAN (CAN G) potential distributor electrical connector

11

Route vehicle interior electrical wiring harness (1) as shown along top right roof paneling, under front headliner (14) up to passenger-side footwell.

 Do not kink the vehicle interior electrical wiring harness (1) and ensure it is routed without chafing.
This prevents damage.

 Make sure that the vehicle interior electrical wiring harness (1) does not touch the front headliner (14).
This will prevent interference.

 Model 447.6 with code D50 (Full-width partition wall) Model 447.6 with code D51 (Full-width partition wall with 1 window)
To do this, pass the vehicle interior electrical wiring harness (1) through the opening in the partition wall (13) at the top.

12

Fasten vehicle interior electrical wiring harness (1) in sections using cable ties to factory-installed electrical wiring harness.

13

Install CAN G electrical line (5) in front end CAN (CAN G) potential distributor electrical connector (X304).

14

Install CAN electrical line (17) in interior CAN (CAN B) potential distributor electrical connector (X301).

15

Install fuse and relay module electrical line (7) in firewall fuse and relay module (K40/11).

6

Radio electrical line

N87/2

Radio (Audio)

16

Route radio electrical line (6) of vehicle interior electrical wiring harness (1) as shown to radio (Audio) (N87/2).

 Do not kink the radio electrical line (6) and ensure it is routed without chafing.
This prevents damage.

17

Fasten radio electrical line (6) in sections using cable ties to factory-installed electrical wiring harness.

18

Connect radio electrical line (6) to radio (Audio) (N87/2).