an3110s8080ee

Retrofit trailer hitch

Typ an · temat 31.10 · wersja 0200 · 2019-07-18

Dotyczy: Model 447.6/7 with code E58 (Electrics for NAFTA trailer socket) with code ZU7 (National version for Canada) except code E57 (Electrics for trailer socket) Model 447.6/7 with code E58 (Electrics for NAFTA trailer socket) with code ZU8 (National version for USA) except code E57 (Electrics for trailer socket)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 31 Rama, przyczepa › 31.10 Hak holowniczy, złącze przyczepy, złącze siodła — Seria 447 (modele 6**, 7**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.60 Sprzęg przyczepowy › 35.60.3 Pofabryczny montaż/przebudowa — Seria 447 (modele 6**, 7**)

AN31.10-S-8080EE

Retrofit trailer hitch

16.07.2019

Model

447.6/7

with code E58 (Electrics for NAFTA trailer socket)

with code ZU7 (National version for Canada)

except code E57 (Electrics for trailer socket)

Model

447.6/7

with code E58 (Electrics for NAFTA trailer socket)

with code ZU8 (National version for USA)

except code E57 (Electrics for trailer socket)

Modification notes

15.07.2019

Method extended and document revised

Operation steps 5, 6, 7, 8, 9

AN31.19-S-8100-05E

Retrofit trailer hitch

Shown on model 447.7 with code V23 (Interior trim, superior version)

1

Stowage compartment cover

2

Trailer hitch crossmember

N28/1

Trailer recognition (AAG) control unit

S31.10-4521-06

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01A

Topical note

Notes on installing a trailer hitch

AH31.10-P-1000-02B

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove

1

Detach ground line of on-board electrical system battery.

AR54.10-S-0003E

2.1

Remove stowage compartment in right rear passenger compartment.

Model 447.7 with code V23 (Interior trim, superior version) except code E28 (Additional battery for retrofitted consumers) except code SB6 (Comfort front passenger seat, swiveling) except code ZG2 (All-wheel drive, permanent)

AR68.00-S-0009E

2.2

Remove rear right load compartment trim.

Model 447.6

AR68.30-S-1180E

Only remove the lower load compartment paneling.

3

Remove rear bumper.

AR88.20-S-2200E

4

Remove towing eye from rear crossmember.

Model 447.6/7

AR64.20-S-1203E

The towing eye is no longer required and can be disposed of properly after removal.

Install

5

Retrofit trailer hitch electrical wiring harness.

AN31.19-S-8100-05E

The trailer recognition (AAG) control unit (N28/1) is also installed at the same time.

M8

*BA00.10-N-1003-01A

Long wedge

*115589035900

6

Install trailer hitch crossmember (2) with coupling ball.

AN31.11-S-8080-04E

Screw/bolt, trailer hitch crossmember to longitudinal member

*BA31.10-N-1001-01J

7

Make bumper cutout retroactively.

AN31.11-S-8080-08E

Commercially available devices/tools
Body saw

8

Install rear bumper.

AR88.20-S-2200E

9.1

Install stowage compartment in right rear passenger compartment.

Model 447.7 with code V23 (Interior trim, superior version) except code E28 (Additional battery for retrofitted consumers) except code SB6 (Comfort front passenger seat, swiveling) except code ZG2 (All-wheel drive, permanent)

AR68.00-S-0009E

9.2

Install rear right load compartment trim.

Model 447.6

AR68.30-S-1180E

10

Attach ground line of on-board electrical system battery.

AR54.10-S-0003E

11

Supplement special equipment in Vehicle Documentation (VeDoc).

Designation of the respective special equipment: CODE Q24 (NAFTA trailer crossmember, towing capacity 5000Ibs). The existing CODE E58 (Electrical system for NAFTA trailer socket) has to be removed.

12

Perform SCN coding on electronic ignition lock (EIS) control unit (N73).

AR54.21-S-0015E

Under the menu item "Control unit adaptations", follow the instructions for "SCN coding".

Do not yet remove vehicle diagnosis system.

13

Perform SCN coding on Electronic Stability Program (ESP) control unit (N30/4).

AR54.21-S-0015E

Under the menu item "Control unit adaptations", follow the instructions for "SCN coding".

Do not yet remove vehicle diagnosis system.

14

Perform SCN coding on signal acquisition and actuation module (SAM) control unit (N10/1).

AR54.21-S-0015E

Under the menu item "Control unit adaptations", follow the instructions for "SCN coding".

Do not yet remove vehicle diagnosis system.

15

Perform SCN coding at reversing camera (RFK) control unit (B84/3) or rear-end door reversing camera (RFK) control unit (B84/10).

MODEL 447.6/7 with CODE FR8 (Reversing camera)

AR54.21-S-0015E

Under the menu item "Control unit adaptations", follow the instructions for "SCN coding".

Check

16

Perform function check on trailer socket.

AN31.19-S-8100-06E

000 588 00 63 00 Test box

WS82.00-P-0027B

Use the adapter for 7-pin trailer socket (X58/11).

Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

8.8

10.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

23

32

Phosphated

Nm

21

29

Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

12.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

38

Phosphated

Nm

36

Trailer hitch

Number

Designation

Model 447

BA31.10-N-1001-01J

Screw/bolt, trailer hitch crossmember to longitudinal member

Nm

90

Retrofit trailer hitch

115 589 03 59 00

Long wedge

Parts ordering note

Part no.

Designation

Quantity

KG99

Trailer hitch package contents

1

Powiązane dokumenty