1 | Trademark |
2-4 | World manufacturer code |
5 | Model |
6-7 | Model, cab, weight |
8-9 | Engine, brake |
10 | Check digit |
11 | Model year |
12 | Production plant |
13-18 | Serial number |
19 | Trademark |
D60.00-1101-06
Meaning of vehicle identification number
WD1 Y D1 41 1 Y 5 123456
WD1
World manufacturer code:
WD1 = Chassis with cab
WD2 = Truck
WD5 = Multi-purpose vehicle
WD1 y
Model:
W = Multi-purpose vehicle
X = Chassis with cab
Y = Truck
WD1 Y D1
Wheelbase, weight:
D1 = Wheelbase 3000 mm (15 in), 8,001 to 9,000 lbs, class G
D2 = Wheelbase 3550 mm (15 in), 8,001 to 9,000 lbs, class G
D6 = Wheelbase 3567 mm (16 in), 8,001 to 9,000 lbs, class G
D3 = Wheelbase 4025 mm (15 in), 8,001 to 9,000 lbs, class G
D7 = Wheelbase 4042 mm (16 in), 8,001 to 9,000 lbs, class G
D4 = Wheelbase 3550 mm (15 in), 9,001 to 10,000 lbs, class H
D5 = wheelbase 4025 mm (15 in), 9.001 up to 10.000 lbs, class H
WD1 Y D1 41
Engine, brake:
41 = MB OM 612 (ME9), diesel, 2.7 liter, 5-cylinder inline engine, hydraulic brake
42 = MB OM 612 (MF1), diesel, 2.7 liter, 5-cylinder inline engine, hydraulic brake
43 = MB OM 647 (MC0), diesel, 2.7 liter, 5-cylinder inline engine, hydraulic brake
44 = MB OM 647 (MF2), diesel, 2.7 liter, 5-cylinder inline engine, hydraulic brake
WD1 Y D1 41 1
Check digit
WD1 Y D1 41 1 Y
Model year:
Y = 2000
1 = 2001
2 = 2002
3 = 2003
4 = 2004 etc.
WD1 Y D1 41 1 Y 5
Manufacturing plant:
5 = Düsseldorf plant, Germany
WD1 Y D1 41 1 Y 5 123456
Serial number
The vehicle identification number is on the right body console.
It begins and ends with the Mercedes star (trademark) and has 19 stamped characters with a total length of 104.5 mm.
If the body or the right body console has been repaired, the vehicle identification number must be restamped into the body console at the same location.
This is a change to the vehicle which is subject to compulsory notification. In the Federal Republic of Germany immediately inform the vehicle licensing agency in writing.
The vehicle holder is required to complete a certificate for the vehicle licensing authority which indicates that the vehicle identification number has been re-stamped after completing body repairs.
As prove, the original vehicle identification number cut out of the old part, may also be enclosed.
A vehicle identification number which has been incorrectly or incompletely stamped by the workshop must be crossed out and the correct number must be stamped in the spare field on the right body console.
This procedure should be noted in the certificate for the vehicle licensing authority as follows:
"The incorrectly or incompletely stamped vehicle identification number has been crossed out and the correct vehicle identification number stamped in the spare field on the right body console."
Export countries must observe their relevant vehicle licensing provisions and legal regulations.