Check values for gap dimensions |
Number | Designation | MODEL 222 | ||
BE60.00-P-1002-01BA | Engine hood to fender | Dimension "A" | mm | 3 (0,5) |
For picture, see | ||||
BE60.00-P-1003-01BA | Engine hood to fender | Dimension "A1" | mm | 4 (1) |
For picture, see | ||||
BE60.00-P-1004-01BA | Engine hood to headlamp | Dimension "B" | mm | 3,5 (1) |
For picture, see | ||||
BE60.00-P-1005-01BA | Engine hood to radiator trim | Dimension "C" | mm | 3,5 (1) |
For picture, see | ||||
BE60.00-P-1006-01BA | Protrusion of radiator trim/engine hood | Dimension "C" | mm | 1 (1) |
For picture, see | ||||
BE60.00-P-1007-01BA | Engine hood to bumper | Dimension "D" | mm | 3,5 (1) |
For picture, see | ||||
BE60.00-P-1008-01BA | Bumper to headlamp | Dimension "E" | mm | 2,5 (–1,5/+1) |
For picture, see | ||||
BE60.00-P-1009-01BA | Front/rear door to roof paneling, side | Dimension "F" | mm | 4,5 (1) |
For picture, see | ||||
BE60.00-P-1010-01BA | Front door to fender | Dimension "G" | mm | 4 (0,5) |
For picture, see | ||||
BE60.00-P-1011-01BA | Front door to rear door | Dimension "H" | mm | 4,5 (0,5) |
For picture, see | ||||
BE60.00-P-1012-01BA | Rear door to side section, bottom | Dimension "I" | mm | 4 (0,5) |
For picture, see | ||||
BE60.00-P-1013-01BA | Front door cover to rear door cover | Dimension "J" | mm | 4 (0,5) |
For picture, see | ||||
BE60.00-P-1014-01BA | Trunk lid to rear fender at top | Dimension "K" | mm | 3,5 (1) |
For picture, see | ||||
BE60.00-P-1015-01BA | Taillamp to bumper | Dimension "L" | mm | 2 (1) |
For picture, see | ||||
BE60.00-P-1016-01BA | Trunk lid to bumper | Dimension "M" | mm | 4,5 (1) |
For picture, see | ||||
BE60.00-P-1017-01BA | Trunk lid to bumper | Dimension "M1" | mm | 5 (+2,5) |
For picture, see | ||||
BE60.00-P-1018-01BA | Rear fender to taillamp | Dimension "N" | mm | 1 (0,5) |
For picture, see | ||||
BE60.00-P-1019-01BA | Fuel filler flap | Dimension "O" | mm | 2 (0,5) |
For picture, see | ||||