ar9160w0660a
Remove/install airbag unit on steering wheel
Type ar · emne 91.60 · versjon 0302 · 2018-05-07
Gjelder for: Model 374, 375, 940, 942, 943, 944, 950, 952, 953, 954, 958 with code SA5 (Airbag, front driver's seat) Model 970, 972, 974, 975, 976 with code SA5 (Airbag, front driver's seat)
Ikke tilgjengelig på «no»; vises på Engelsk.
Plassering
Funksjonsgruppe 3 Påbygg › 91 Seter, senger, sikkerhetssystem › 91.60 Kollisjonspute, fotgjengerbeskyttelse — Serie 374 · Serie 375 · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 · Serie 952 · Serie 953 · Serie 954 · Serie 958 · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976
EinPAS 27 Passive sikkerhets-/sikringssystemer › 27.16 Kollisjonspute › 27.16.20 Kollisjonspute — Serie 374 · Serie 375 · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 · Serie 952 · Serie 953 · Serie 954 · Serie 958 · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976
AR91.60-W-0660A
| Remove/install airbag unit on steering wheel
| 25.04.2018
|
Model
| 374, 375, 940, 942, 943, 944, 950, 952, 953, 954, 958
|
|
| with code SA5 (Airbag, front driver's seat)
|
Model
| 970, 972, 974, 975, 976
|
|
| with code SA5 (Airbag, front driver's seat)
|
Shown on model 970 with body 972.890
|
Warning
| Risk of injury during testing and repair operations related to pyrotechnical components
| Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.
| AS91.00-Z-0008-01A
|
|
| Notes on safety-relevant components
|
| AH00.00-Z-0019-01A
|
|
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components
|
| AH91.00-Z-0000-10A
|
| Remove/install
|
|
|
1
| Switch off ignition.
|
|
|
2
| Disconnect ground lead from battery.
|
| AR54.10-W-0003A
|
3
| Remove bolts (2) from underside of steering wheel.
| Screw/bolt, airbag to steering wheel
| *BA91.60-N-1001-01B
|
|
|
| Screwdriver bit
| *126589001000
|
4
| Remove airbag (1) with attached electric line from steering wheel.
|
|
|
5
| Disconnect electrical connector from airbag (1).
| Installation: The electrical connector must latch into place.
|
|
6
| Install in the reverse order
|
|
|
7
| Perform function test.
| The airbag indicator lamp should not come on when the wheels are fully turned in either direction.
|
|
8
| Dispose of removed airbag (1) properly.
| Only if new airbag (1) was installed.
|
|
Number
| Designation
|
| Model 374, 375, 958
| Model 950, 952, 953, 954, 956, 970, 972, 974, 975, 976
|
BA91.60-N-1001-01B
| Screw/bolt, airbag to steering wheel
| Nm
| 6
| 6
|
Number
| Designation
|
| Model 940, 942, 943, 944
|
BA91.60-N-1001-01B
| Screw/bolt, airbag to steering wheel
| Nm
| 6
|
Refererte dokumenter
