ar6880p0010lws
Remove/install load compartment floor front section
Type ar · emne 68.80 · versjon 0102 · 2020-03-20
Gjelder for: Model 205.2 (except 205.213/247/253), 213.2 (except 213.216/253)
Ikke tilgjengelig på «no»; vises på Engelsk.
Plassering
Funksjonsgruppe 3 Påbygg › 68 Interiør › 68.80 Bagasjeromsgulv/gulvbelegg — Serie 205 (modeller 200, 201, 204, 205, 207, 208, 209, 211, 212, 214, 215, 218, 219, 236, 237, 240, 242, 243, 244, 245, 248, 249, 264, 266, 275, 276, 277, 278, 280, 283, 284, 286, 287) · Serie 213 (modeller 204, 205, 208, 211, 212, 213, 217, 219, 220, 222, 223, 227, 233, 234, 237, 242, 243, 245, 259, 260, 261, 264, 266, 268, 271, 277, 278, 279, 280, 283, 287, 288, 289)
EinPAS 37 Interiør › 37.46 Gulv › 37.46.33 Lasteromsgulv — Serie 205 (modeller 200, 201, 204, 205, 207, 208, 209, 211, 212, 214, 215, 218, 219, 236, 237, 240, 242, 243, 244, 245, 248, 249, 264, 266, 275, 276, 277, 278, 280, 283, 284, 286, 287) · Serie 213 (modeller 204, 205, 208, 211, 212, 213, 217, 219, 220, 222, 223, 227, 233, 234, 237, 242, 243, 245, 259, 260, 261, 264, 266, 268, 271, 277, 278, 279, 280, 283, 287, 288, 289)
AR68.80-P-0010LWS
| Remove/install load compartment floor front section
| 09.01.2020
|
Model
| 205.2 (except 205.213/247/253), 213.2 (except 213.216/253)
|
1
| Load compartment floor rear section
|
| 4
| Tie-down eye
|
2
| Load compartment floor front section
|
| 5
| Guide
|
3
| Screw
|
| 6
| Cover
|
Warning
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.
| No parts of the body or limbs should be within the operating area when the components are moving.
| AS00.00-Z-0011-01A
|
|
| Notes on HANDS-FREE ACCESS
|
| AH80.61-P-0001-01A
|
| Remove/install
|
|
|
1
| Remove load compartment floor rear section (1).
|
|
|
2
| Unclip covers at tie-down eyes (4).
|
|
|
3
| Unscrew screws (3) and remove tie-down eyes (4).
| Model 205.2 (except 205.213/247/253)Screw/bolt for tie-down eye
| *BA68.50-P-1001-03I
|
|
|
| Model 213.2 (except 213.216/253)Bolt, cargo retainers/tie-down eye to body
| *BA68.50-P-1001-03J
|
4
| Lift load compartment floor front section (2) at front and remove toward rear.
| Installation: Ensure that the guides (5) and cover (6) are seated correctly.
|
|
5
| Install in the reverse order.
|
|
|
Number
| Designation
|
| Model 205
|
BA68.50-P-1001-03I
| Screw/bolt for tie-down eye
| Nm
| 24
|
Number
| Designation
|
| Model 213.2
|
BA68.50-P-1001-03J
| Bolt, cargo retainers/tie-down eye to body
| Nm
| 24
|
Refererte dokumenter
