Remove/install cover on instrument cluster

Type ar · emne 68.10 · versjon 0206 · 2003-09-15

Gjelder for: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Ikke tilgjengelig på «no»; vises på Engelsk.

AR68.10-D-1550A

5.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Remove/install cover on instrument cluster

D68.20-1101-11

1 Cover

2 Bolt

3 Connector

 	Remove/Install
1	Unscrew screws (2)
2	Pull out cover (1)		*140589023300
		 To avoid damage to the cover when removing move removal hook (01) through second louver from bottom and position on reinforcement (magnified section).
		 Installation: Press in cover uniformly.
3	Disconnect plug (3)	 A different number of switches may be fitted depending on vehicle equipment.
4	Install in the reverse order

Pulling hooks

140 589 02 33 00