Remove/install ABS measuring ring

Type ar · emne 42.30 · versjon 0112 · 2007-06-19

Gjelder for: MODEL 374, 375.3 /4, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958.2 /4 Non-driven axles with disk brake

Ikke tilgjengelig på «no»; vises på Engelsk.

AR42.30-W-0160A

14.6.07

MODEL 374, 375.3 /4, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958.2 /4
Non-driven axles with disk brake

W42.30-0002-01

1 ABS measuring ring

2 Drift

 	Remove/install
1	Remove wheel		AR40.10-W-1100A
2	Remove brake carrier with brake caliper		AR42.10-W-0600A
3	Remove wheel hub	Front axle 739.2/5	AR33.20-W-0310A
		Front axle 739.3/9	AR33.20-W-0310AW
		Leading axle 733.731	AR35.50-T-0005A
		Leading axle 739.58 Hendrickson leading axle	AR35.50-W-0005A
		Trailing axle 749.011 Dual-tired trailing axle (Nummek)	AR35.50-W-0003B
		Trailing axles 749.108/109	AR35.50-W-0003A
		Trailing axle 749.732	AR35.50-W-0003C
		Trailing axle 749.733	AR35.50-W-0003D
		Trailing axle 749.919  No repair instructions have been prepared for this trailing axle.
4	Remove ABS measuring ring (1)	 Installation: Drive in ABS measuring ring (1) up to stop.
			*739589021500
5	Install in the reverse order

739 589 02 15 00

Drift