Remove/install ABS sensor

Type ar · emne 42.30 · versjon 0120 · 2008-11-18

Gjelder for: MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976 MODEL 671 with FRONT AXLE 733.406

Ikke tilgjengelig på «no»; vises på Engelsk.

AR42.30-W-0150A

11.11.08

MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

MODEL 671 with FRONT AXLE 733.406

W42.30-0001-01

Front axle rpm sensor, shown on disk brake

1 Rpm sensor

2 Socket

W42.30-0004-01

Rear axle rpm sensor, shown on disk brake

1 Rpm sensor

2 Socket

3 Cover

 	Remove/install
1	Detach cover (3) from rpm sensor (1)	 Only at rear axle.
2	Remove rpm sensor (1)	 Installation: Apply a thin coating of grease to the rpm sensor (1) and push by hand all the way into the bushing. The gap between the rpm sensor (1) and measuring ring is adjusted automatically by the wheel bearing play.	*BR00.45-Z-1019-06A
3	Remove socket (2)	 Installation: Replace the bushing (2).
4	Install in the reverse order

Repair materials

Number	Designation	Order number
BR00.45-Z-1019-06A	ABS sensor grease	A 000 989 62 51 10