ar3540d913102a

Installing and adjusting differential lock shift cylinder

Type ar · emne 35.40 · versjon 0105 · 2001-07-24

Gjelder for: REAR AXLE 741.130 /131 /407 /408 with CODE (A71) Rear axle with differential lock REAR AXLE 741.130 /408 in MODEL 690.6 with CODE (A71) Rear axle with differential lock

Ikke tilgjengelig på «no»; vises på Engelsk.

Plassering

Funksjonsgruppe 2 Understell › 35 Bakaksel › 35.40 Differensialsperrer — Serie 690 (modeller 6**)

EinPAS 17 Drivlinje/aksel › 17.51 Bakaksel › 17.51.38 Giroverføring — Serie 690 (modeller 6**)

Gjelder også motorer/girkasser: 741 130, 741 131, 741 407, 741 408

AR35.40-D-9131-02A

Installing and adjusting differential lock shift cylinder

Rear axle 741.130/131/407/408 with differential lock (code A71)

Installation: With new shift cylinder or if components of the differential lock have been replaced

Differential lock

Number

Designation

Rear axle
741.407/408/130/
131 with differential lock (code A71)

BA35.40-N-1002-01B

Bolt, shift cylinder to rear axle beam

M8

Nm

25

Installing and adjusting differential lock shift cylinder

D35.40-0007-01

1 Move shift cylinder to the applied position with hydraulic or pneumatic pressure.

2 Fit shift cylinder with new gasket on axle tube and screw in retaining bolts.

Do not tighten the retaining bolts.

3 Push shift cylinder towards the differential (arrow) until resistance can be felt.

4 Tighten shift cylinder bolts in this position .

5 Turn the axle shafts to check that the differential lock is engaged.

The differential lock must be engaged.