ar3320d145202a

Detaching wishbone from steering knuckle and front axle beam

Type ar · emne 33.20 · versjon 0105 · 2001-08-09

Gjelder for: FRONT AXLE 730.408 /410 in MODEL 901, 902 FRONT AXLE 730.409 in MODEL 902 FRONT AXLE 730.409 /413 in MODEL 903 FRONT AXLE 730.411 /414 in MODEL 904 FRONT AXLE 732.2 in MODEL 690.6

Ikke tilgjengelig på «no»; vises på Engelsk.

Plassering

Funksjonsgruppe 2 Understell › 33 Foraksel › 33.20 Hjulføring, nav — Serie 690 (modeller 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 17 Drivlinje/aksel › 17.50 Foraksel › 17.50.41 Opphengsarm/styrearm/stabilisator — Serie 690 (modeller 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904

Gjelder også motorer/girkasser: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 732 2**

AR33.20-D-1452-02A

Detaching wishbone from steering knuckle and front axle beam

Detaching wishbone from steering knuckle and front axle beam

730 589 02 33 00

Puller

Detaching wishbone from steering knuckle and front axle beam

D33.20-0021-01

1 Unscrew nut (13) on wishbone joint.

2 Press steering knuckle (10) off wishbone using puller.

Detaching wishbone from steering knuckle and front axle beam

D33.20-0020-01

3 Unscrew stop plate (7) from wishbone (12).

On versions with anti-roll bar, pull the stop plate hanging on the anti-roll bar upwards and leave hanging.

Detaching wishbone from steering knuckle and front axle beam
Detaching wishbone from steering knuckle and front axle beam

D33.20-0004-01

D33.20-0002-01

4 Undo rear screw joint on wishbone by unscrewing wishbone bolt (2).

5 Undo front screw joint on wishbone by unscrewing wishbone bolt (2).

6 Remove wishbone (12).