AR27.60-D-0600A | Removing, installing servo motor | 11.12.97 |
TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission
TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission
D27.60-0013-12
1 Actuator motor and segment switch housing
2 Hexagon bolts
3 Locking device for selector lever control cable
4 Selector lever control cable
5 Operating lever
6 Hexagon bolt
S89.1 8-pin connector
S89.2 4-pin connector
D27.60-0034-11
7 Hexagon bolts
8 Hexagon socket bolts
9 Contacts to voltage supply
10 Segment switch actuator motor (M50)
11 Automatic transmission segment switch (M50)
| Removing, installing | ||
1 | Switch actuator motor to position "P" | ||
2 | Detach selector lever control cable (4) from operating lever (5) | ||
3 | Disconnect connectors (S89.1) and (S89.2), cut through cable straps if necessary | Installation: Secure cables with cable straps. | |
4 | Remove locking device (3) | ||
5 | Unscrew hexagon bolts (2) | ||
6 | Remove housing (1) with actuator motor and segment switch | ||
7 | Loosen hexagon bolt (6) on operating lever (5) and pull off operating lever | ||
8 | Unscrew three hexagon bolts (7) | ||
9 | Remove actuator motor (10) with segment switch (11) | ||
10 | Disconnect contacts (9) | ||
11 | Unscrew hexagon socket bolts (8) | ||
12 | Remove segment switch (11) from actuator motor (10) | Check components and replace if necessary | |
13 | Install in reverse order |