ap1820s010004ea

Replace oil filter element

Type ap · emne 18.20 · versjon 0103 · 2016-04-20

Gjelder for: Engine 274 in model 447 Engine 274 in model 448

Ikke tilgjengelig på «no»; vises på Engelsk.

Plassering

Funksjonsgruppe 1 Motor › 18 Motorsmøring, motoroljekjøling › 18.20 Oljefilter — Serie 447 · Serie 448

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.31 Filter/kjøling/termostat/vifte/beholder — Serie 447 · Serie 448

Gjelder også motorer/girkasser: 274 ***

AP18.20-S-0100-04EA

Replace oil filter element

Engine

274 in model 447

Engine

274 in model 448

Oil filter

Number

Designation

Engine 274

BA18.20-N-1001-01V

Oil filter cover to oil filter housing

Nm

25

Replace oil filter element

1

Threaded cap

2

Oil filter element

3

Sealing ring

4

End plate

S18.20-4514-06

1

Unscrew threaded cap (1).

Allow engine oil to drain from filter housing.

2

Remove threaded cap (1) with oil filter element (2) and unclip oil filter element (2) by pressing at side.

Ensure that no foreign bodies get into the filter housing. Never wipe out the filter housing.
Damage may occur otherwise.

3

Check old oil filter element (2) for completeness (picture A).

If the old oil filter element (2) and its synchronizer retainer plate (4) (picture B) are separated:

Remove synchronizer retainer plate (4) from filter housing.

4

Replace sealing rings (3).

5

Clip new oil filter element (2) into the threaded cap (1).

6

Screw on threaded cap (1) with oil filter element (2) and tighten   .