ap1322d138101a

Slacken, tension poly-V belt

Type ap · emne 13.22 · versjon 0107 · 2010-07-27

Gjelder for: ENGINE 111.948 /978 /979 /984

Ikke tilgjengelig på «no»; vises på Engelsk.

Plassering

Funksjonsgruppe 1 Motor › 13 Kompressor, remdrifter › 13.22 Enremsdrift

EinPAS 15 Motor › 15.18 Reimdrift › 15.18.30 Reim/reimskive/strammeanordning/styrerulle

Gjelder også motorer/girkasser: 111 948, 111 978, 111 979, 111 984

AP13.22-D-1381-01A

Slacken, tension poly-V belt

Engine 111.948/978/979/984

Slacken, tension poly-V belt

N13.25-2087-01

Slacken poly V-belt

1 Swivel clamping arm (2) and tensioner pulley (3) at stud bolt (4, external torx E10) up to end stop in direction of arrow.

Do nor swivel tensioning arm (2) on tensioning rolls fastening nut.

Tension poly V-belt

1 Swivel clamping arm (2) and tensioner pulley (3) on stud bolt (4, external torx E10) up to the end stop in the direction of the arrow and place poly-V belt onto belt pulley of coolant pump.

2 Swivel clamping arm and tensioner pulley back.

3 Check seat of poly-V belt on belt pulleys and location of position mark (B) for clamping arm relative to working area (A) on the housing.

The position mark (B) must be located within the working area (A). If this is not the case, check the length of the poly-V belt and the clamping device.