Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
1 | Connect Star Diagnosis | ||
2 | Switch off high-voltage system using Star Diagnosis | ||
| |||
If a fault is displayed, disable high-voltage system. | |||
Print out and store power disable event log and, where applicable, shutoff event log of high-voltage system. | |||
| Check | ||
3 | Visually inspect engine, clutch housing and cooler for leaks | Slightly damp sealing points are insignificant. | |
If leaks are severe with constant oil loss or water loss, subject to separate repair order: | |||
| |||
Eliminate any leaks immediately. | |||
4 | Perform initial startup of high-voltage system | ||
|