1 | System selection button |
2 | Accept call button |
3 | OK button |
4 | Scroll forward button |
5 | Exit menu button |
6 | Multifunction display |
G00.20-3160-11
1 | Close doors. |
2 | Turn the key in the ignition lock into position "1". |
The standard display (trip odometer/total distance) must appear on the multifunction display (6); if necessary press the scroll forward button (4) repeatedly. |
3 | Repeatedly press system selection button (1) until menu item "Trip" is highlighted on the multifunction display (6). |
"Trip" remains selected for approx. 5 s. Operation step 4 must be carried out within this time. |
4 | First press and hold down "Accept call" button (2) and then, within 1 second, also press and hold down OK button (3) for approx. 5 seconds. |
The multifunction display (6) shows the workshop menu with the "Vehicle data", "Dynamometer test" and "ASSYST PLUS" tabs. |
5 | Press the scroll forward button (4) repeatedly until "ASSYST PLUS" is highlighted and confirm selection with the OK button (3). |
The tabs "Service data", "Full service", "Veh. handover" appear on the multifunction display (6). |
6 | Press the scroll forward button (4) repeatedly until "Veh. handover" is highlighted and confirm selection with the OK button (3). |
"Vehicle handed over?" is displayed on the multifunction display (6). |
7 | Press scroll forward button (4) repeatedly until "Yes" is highlighted, and confirm selection with OK button (3). |
8 | Press "Exit menu" button (5) repeatedly until standard display (trip odometer/total distance) appears on the multifunction display (6). |
9 | Turn the key in the ignition lock into position "0". |