sm4220l0005a

Making drain hole in compressor

Type sm · thema 42.20 · versie 0101 · 2003-06-17

Geldig voor: MODEL 668.###, 670.### ## up to 081120 up to 28.3.98 except CODE (B16) Dual-circuit hydraulic/dual-circuit compressed-air brake except CODE (B19) Boosted dual-circuit hydraulic/dual-circuit compressed-air brake

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 2 Onderstel › 42 Remsysteem - hydraulisch systeem en mechanisch gedeelte › 42.20 Parkeerrem — Serie 668 · Serie 670

EinPAS 21 Remmen/vacuümsysteem/persluchtsysteem › 21.35 Persluchtsysteem › 21.35.35 Compressor — Serie 668 · Serie 670

EinPAS 45 Gegevens/informatie › 45.20 Informatie/maatregelen › 45.20.40 Servicemaatregelen — Serie 668 · Serie 670

SM42.20-L-0005A

Making drain hole in compressor

2.2.99

MODEL 668.###, 670.### ## up to 081120 up to 28.3.98
except CODE (B16) Dual-circuit hydraulic/dual-circuit compressed-air brake
except CODE (B19) Boosted dual-circuit hydraulic/dual-circuit compressed-air brake

Making drain hole in compressor

L42.20-0008-01

Operation no. of operation texts or standard texts and flat rates

Division

Op. no.

Operation text

N

023715

PROCESSING AIR COMPRESSOR (ELECTRIC) AS PER INSTRUCTIONS 10 work units/0.8 h

1

Make drain hole at the lowest point (on the right next to the bead)

3 mm dia. at a distance of 20 mm from the rear edge

Water runs out of the hole

Replace compressor

SM42.20-L-0004A

Water does not run out of the hole

SM42.20-L-0001A

Verwezen documenten