si3515y0001b
Service Information: Optimize wishbone control arm
Type si · thema 35.15 · versie 0100 · 2018-07-05
Geldig voor: Rear axle 400.780/781 in model 400.241/243 Mounting nut changes
Niet beschikbaar in “nl”; getoond in Engels.
Plaats
Functiegroep 2 Onderstel › 35 Achteras › 35.15 Wieldraagarmen — Serie 400 (modellen 241, 243, 780, 781)
EinPAS 17 Aandrijflijn/as › 17.51 Achteras › 17.51.40 Dwarsgeplaatste wieldraagarm/geleidearm/stabilisator — Serie 400 (modellen 241, 243, 780, 781)
EinPAS 17 Aandrijflijn/as › 17.52 Extra as › 17.52.40 Dwarsgeplaatste wieldraagarm/geleidearm/stabilisator — Serie 400 (modellen 241, 243, 780, 781)
EinPAS 45 Gegevens/informatie › 45.20 Informatie/maatregelen › 45.20.20 Service-informatie — Serie 400 (modellen 241, 243, 780, 781)
SI35.15-Y-0001B
| Service Information: Optimize wishbone control arm
| 05.07.2018
|
Rear axle
| 400.780/781 in model 400.241/243
|
|
| Mounting nut changes
|
V-rod axle mounting nut changed
|
A
| Existing
|
B
| Modified
|
C
| Front of the vehicle
|
1
| M24 Lock nut
|
2
| M24 Hex nut
|
Introduction of hex type nut
In V-rod axle mounting lock nut is changed to hex type nut for continuous field improvement and torque retention.
Rear axles
| Existing
| Modified
|
V-rod mounting nut torque
| 78062 Nm
| 750150 Nm + 900100
|
Periodic maintenance schedule
| At every 400 Hrs V-rod mounting nut torque to be checked / tighten
| At every 400 Hrs V-rod mounting nut torque to be checked / tighten
|
Old part description
| Old part number
| New part description
| New part number
| Interchangeability
| Quantity/Vehicle
| Old part status (Alternate/Supersede/Obsolete)
| Usage of old part
|
M 24 Lock nut
| N 000000005401
| M 24 Hex nut
| N 000000005464
| No
| 4
| Obsolete
| No
|
