gf0761p6000ke

Component description for the ME-SFI [ME] control unit

Type gf · thema 07.61 · versie 0103 · 2008-04-07

Geldig voor: ENGINE 271.921 /944 /946 /948 /955 up to Model Year 8 ENGINE 271.940 in MODEL 203.042 /242 /742 up to Model Year 8 ENGINE 271.940 in MODEL 209.342 /442 ENGINE 271.941 /956

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 1 Motor › 07 Mengselvorming › 07.61 Benzine-inspuit- en ontstekingssysteem ME — Serie 203 (modellen 042, 242, 742) · Serie 209 (modellen 342, 442)

Geldt ook voor motoren/versnellingsbakken: 271 921, 271 940, 271 941, 271 944, 271 946, 271 948, 271 955, 271 956

GF07.61-P-6000KE

Component description for the ME-SFI [ME] control unit

19.4.06

ENGINE 271.921 /944 /946 /948 /955 up to Model Year 8

ENGINE 271.940 in MODEL 203.042 /242 /742 up to Model Year 8

ENGINE 271.940 in MODEL 209.342 /442

ENGINE 271.941 /956

Component description for the ME-SFI [ME] control unit

P07.61-2622-01

Location

N3/10 ME control unit

The ME control unit is located on the left at the air filter housing.

Task

Engine control (SIM 4KE) is contained within the ME control unit.

The abbreviation SIM 4KE means:

S = Siemens

I = Integrated

M = Engine control

4 = 4-cylinder

KE = Port injector

The following systems are controlled and coordinated by the ME control unit:

Ignition system

Injection system

Electronic accelerator/cruise control/idle speed control

Diagnosis and fault storage

Drive authorization system/immobilizer

Emission control system

Design

The housing of the ME control unit is manufactured from aluminum and is watertight. The housing contains the measuring and control electronics of the engine control.