AR83.70-D-5937A | Removing and installing auxiliary heater control module | 4.11.96 |
MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D1L-C
MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation B1L-C
D83.70-0009-06
1 Control module
2 Electrical connector
3 Electrical connector
4 Retaining bracket
| Removal, installation | ||
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation | Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
1 | Exert upward tension on retaining bracket (4, arrow A) | ||
2 | Remove control module (1) | Installation: First hook in control module at bottom (arrow B), then catch at top in retaining bracket (arrow A). | |
3 | Disconnect electrical connectors (2, 3) | ||
4 | Install in opposite order |
Verwezen documenten
- as8370z000201a Explosiegevaar door brandstofdampen, vergiftigingsgevaar door het inademen van verbrandingsgassen en kans op letsel door verbrandingen tijdens of na het verwarmen.