1 | Screw |
2 | Electrical connections |
3 | Vacuum line |
4 | Screw |
5 | Cover |
6 | Cover (with code 600 (Headlamp cleaning system)) |
7 | Seal strip |
8 | Nut |
E1 | Left lamp unit |
E2 | Right lamp unit |
P82.10-0263-06
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds. | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area. | |
1 | Open engine hood and move to vertical position | ||
2 | Pry off cover (6) of headlamp cleaning system | With code 600 (Headlamp cleaning system). | |
3 | Unscrew screws (4) and remove paneling (5) | ||
4 | Unclip sealing strip (7) from lower edge of paneling (5) and detach paneling | ||
5 | Unscrew screws (1) | ||
6 | Unscrew nut (8) | Installation: | |
7 | Unclip headlamp cleaning system under lamp unit | With code 600 (Headlamp cleaning system). | |
8 | Carefully pull out lamp unit (E1 or E2) towards the front | ||
9 | Disconnect electrical connections (2) from lamp unit (E1 or E2) | ||
10 | Disconnect vacuum line (3) of headlamp range adjustment | With pneumatic headlamp range adjustment. | |
11 | Install in the reverse order | ||
12 | Check/correct headlamp adjustment | ||
| Model 210 except code 491 (USA version) | ||
13 | Perform functional check of headlamp cleaning system | With code 600 (Headlamp cleaning system). |
Verwezen documenten
- ap8210p8260a Koplampafstelling controleren, corrigeren
- ar8840p1000f
- as0000z003501a Kans op levensgevaarlijk letsel bij werkzaamheden aan onderdelen en systemen met een wisselspanning van U >= 30 V (AC) of gelijkspanning van U >= 60 V (DC)
- as8210z000101a Explosiegevaar/brandgevaar door licht ontvlambare stoffen in de nabijheid van xenonlampen. Kans op letsel door uv-licht, hete onderdelen bij xenonkoplampen en glassplinters als xenonlampen barsten. Vergiftigingsgevaar door het inademen