ar8210p1201ea

Removing and installing bulbs of headlamp unit

Type ar · thema 82.10 · versie 0108 · 2001-07-26

Geldig voor: MODEL 202 up to 31.8.96

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 3 Opbouw/carrosserie › 82 Elektrische installatie, opbouw/carrosserie › 82.10 Uitwendige verlichting — Serie 202

EinPAS 30 Verlichtingssysteem › 30.15 Exterieurverlichting › 30.15.40 Voorlicht — Serie 202

AR82.10-P-1201EA

Removing and installing bulbs of headlamp unit

9.7.93

MODEL 202 up to 31.8.96

Removing and installing bulbs of headlamp unit

P82.10-0008-06

Shown on model 202 up to 31.8.96

1 Closure clip

2 Housing cover

3 Low beam electrical connector

4 High beam electrical connector

5 Parking lamp socket

6 Fog lamp electrical connector

7 Low beam bulb

8 Main beam bulb

9 Parking lamp bulb

10 Fog lamp bulb

11 Low beam bulb retaining clip

12 High beam bulb retaining clip

13 Fog lamp bulb retaining clip

Removal, installation

1

Open hood and raise to vertical position

AR88.40-P-1000E

2

Open closure clip (1)

3

Remove housing cover (2)

4

Disconnect electrical connector from corresponding bulb

5

Open relevant bulb retaining clips

6

Remove bulb

Do not grasp the glass of the bulbs with your bare fingers but use a grease-free, soft cloth.
Ensure bulb is correctly installed.

7

Install in the reverse order

Verwezen documenten