ar8210d1202b

Remove/install headlamp unit bulbs

Type ar · thema 82.10 · versie 0105 · 2003-09-15

Geldig voor: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 3 Opbouw/carrosserie › 82 Elektrische installatie, opbouw/carrosserie › 82.10 Uitwendige verlichting — Serie 690 (modellen 6**) · Serie 901 (modellen 6**) · Serie 902 (modellen 6**) · Serie 903 (modellen 6**) · Serie 904 (modellen 6**) · Serie 905 (modellen 6**)

EinPAS 30 Verlichtingssysteem › 30.15 Exterieurverlichting › 30.15.40 Voorlicht — Serie 690 (modellen 6**) · Serie 901 (modellen 6**) · Serie 902 (modellen 6**) · Serie 903 (modellen 6**) · Serie 904 (modellen 6**) · Serie 905 (modellen 6**)

AR82.10-D-1202B

Remove/install headlamp unit bulbs

13.10.98

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Remove/install headlamp unit bulbs

D82.10-0001-05

1, 3 Locking arm

2, 4, 10 Tensioning clamp

5 Fog lamp bulb

6 Housing cover

7 Low beam bulb

8 Side light bulb

9 Main beam bulb

11 Turn signal bulb with holder

Remove/install

1

Open engine hood

2

Open locking arm (1, 3) at rear of headlamp unit and take off housing cover (6)

Do not touch the glass of the bulbs, instead use a soft cloth that is free of grease.

3.1

Open retaining clip (2), take out bulb (7) and unplug electrical connection

Low beam bulb.

3.2

Pull out holder, pull bulb (8) out of seat

Standing lamp bulb.

3.3

Open tensioning clamp (4), take out bulb (5) and unplug electrical connection

Fog lamp bulb.

3.4

Open tensioning clamp (10), take out bulb (9) and unplug electrical connection.

High beam bulb.

4

Install in reverse sequence.

Installation: Insert bulbs into the guide slots provided.