201 589 00 51 00
Weld spot milling cutter
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D63.20-0005-06
1 Expose and mill off weld spots in the areas (A, B and G).
D63.20-0002-09
2 Draw parting line (3) of length a = approx. 340 mm, measured at a distance
b=25 mm from the edge (arrow), on the body.
3 Draw parting line (4) at distance c = approx. 40 mm, measured from the edge (arrow).
4 Draw parting line (5) at 90° angle to parting line (3) and along the panel contours (arrows) on the body.
6 Cut out inside section of A-pillar (2) along the parting lines (3, 4 and 5), and remove.
Cutting depth in area of parting line (4) max. 1 mm.