ar6210d5750a

Removing and installing front end paneling

Type ar · thema 62.10 · versie 0102 · 2004-10-21

Geldig voor: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 3 Opbouw/carrosserie › 62 Voorbouw en frontpaneel › 62.10 Voorbouw — Serie 901 (modellen 0**, 3**, 4**) · Serie 902 (modellen 0**, 3**, 4**) · Serie 903 (modellen 0**, 3**, 4**) · Serie 904 (modellen 0**, 3**, 4**)

EinPAS 35 Carrosserie/chassis/stylingaccessoires › 35.30 Voorzijde › 35.30.30 Voorzijde compleet — Serie 901 (modellen 0**, 3**, 4**) · Serie 902 (modellen 0**, 3**, 4**) · Serie 903 (modellen 0**, 3**, 4**) · Serie 904 (modellen 0**, 3**, 4**)

AR62.10-D-5750A

Removing and installing front end paneling

6.11.95

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Removing and installing front end paneling

D62.10-0001-09

Removal, installation

1

Remove front bumper

AR88.20-D-2000B

2

Remove turn signal lamps and front end center element (a) with head lamps

AR88.30-D-2302A

3

Unscrew bolts (7) on A-pillar

4

Remove sealant (18) between wheelhouse and fender

5

Unscrew bolts (19, 20, 21 and 22)

6

Drill out spreading pins (24) and pull off bumper mount (23)

7

Pull connector off of auxiliary turn signal lamp

8

Remove fender

Remove sealant residues.

9

Reinstall in opposite order

Before installing spray fender on inside with underbody protection agent.
Seal inside of fender at wheel well and wheel well transition.

Verwezen documenten