ar4020d032208c

Measure camber

Type ar · thema 40.20 · versie 0102 · 2010-08-04

Geldig voor: MODEL 667 with REAR AXLE 741.5 /1 Meßgerät P 5 - B 23 MODEL 668 with REAR AXLE 741.5, 742.4 /5 Meßgerät P 5 - B 23 MODEL 670 with REAR AXLE 741.5, 742.4 /5 Meßgerät P 5 - B 23'

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 2 Onderstel › 40 Wielen, wieluitlijning › 40.20 Wieluitlijning — Serie 667 · Serie 668 · Serie 670

EinPAS 20 Onderstel › 20.10 Uitlijnen › 20.10.20 Diagnose/controle/uitlijnen/afstellen — Serie 667 · Serie 668 · Serie 670

Geldt ook voor motoren/versnellingsbakken: 741 1**, 741 5**, 742 4**, 742 5**

AR40.20-D-0322-08C

Measure camber

Test values for rear axle alignment

Number

Designation

Model 667 with rear axle 741.1/5

Model 668 with rear axle 741.5, 742.4/5

Model 670 with rear axle 741.5, 742.4/5

BE40.20-N-1003-12B

Rear wheel camber

°

0° (-40'/+20')

0° (-40'/+20')

0° (-40'/+20')

Measure camber

L40.20-0053-01

1 Insert projector (1) into projector bracket (13).

2 Position projector horizontally and tighten thumb screw (14).

3 Turn knob until bubble level is at center.

Measuring

4 Read off value from dial for camber measurement.

5 Perform camber measurement on other wheel of rear axle in same way.

The dial for camber measurement is divided into the measuring ranges "Camber plus" and "Camber minus". The measuring range "Camber plus" ranges from 0° to +8° . The measuring range "Camber minus" ranges from 0° to -4° . One graduation line on the dial corresponds to 10'.