ar3530b045902a

Removing and installing drive pinion head bearing

Type ar · thema 35.30 · versie 0100 · 2016-02-12

Geldig voor:

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 2 Onderstel › 35 Achteras › 35.30 Aandrijving, wielassen — Serie 688 (modellen 272, 276, 277)

EinPAS 17 Aandrijflijn/as › 17.51 Achteras › 17.51.65 achterasaandrijving/doorgaande aandrijving as — Serie 688 (modellen 272, 276, 277)

Geldt ook voor motoren/versnellingsbakken: 743 ***, 743 498

AR35.30-B-0459-02A

Removing and installing drive pinion head bearing

Removing and installing drive pinion head bearing

000 589 45 33 00

Puller

Removing and installing drive pinion head bearing

B33.30-0008-02

Remove

1 Remove, from the pinion, the lock-ring of the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0007-02

2 Pull the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0012-01

Installing

The inner race of the roller bearings are to be heated up to 80 °C to enable the assembly on the pinion.

3 Assemble the inner race of the roller bearing on the pinion tip with an appropriate drift.

4 Install the snap-ring.