Disassemble/assemble rear wheel hub

AR35.20-D-0320B

29.2.12

REAR AXLE 741.130/ 131

REAR AXLE 741.130 in MODEL 690.6

D35.20-0062-06

1 ABS sensor ring

1.1 Oil retainer, on version without ABS

2 Radial sealing ring

3 Inner tapered roller bearing

4 Wheel hub

5 Outer tapered roller bearing

6 Brake disk

7 Wheel fixing stud

8 Wheel flange ring

9 Bolt M14x1.5 10.9

Modification notes

1.3.12

Value modified: Collar bolt securing wheel flange ring with brake disk to rear wheel hub

	Disassemble/assemble
1	Remove rear wheel hub (4)		AR35.20-D-0310A
2	Take off brake disk (6) and wheel flange ring (8)
3	Pull taper roller bearing outer race of outer wheel bearing (5) out of wheel hub (4)		*000589353300
			*000589683300
4	Pull out taper roller bearing outer race of inner wheel bearing		*000589353300
			*000589683300
	Assemble
5	Check wheel fixing stud (7), replace if necessary		AR35.20-D-0320-01A
6	Drive in tapered roller bearing outer race of inner wheel bearing (3)		*389589021500
7	Drive in tapered roller bearing outer race of outer wheel bearing (5)		*389589021500
8	Screw brake disk (6) and wheel flange ring (8) onto hub	 Model 690.6, 904	*BA42.10-N-1002-13A
		 Model 667	*BA42.10-N-1002-13D
9	Install rear wheel hub (4)		AR35.20-D-0310A

 Rear axle brake disks

Number	Designation				Model 690.612/ 613, 904


BA42.10-N-1002-13A	Collar bolt securing wheel flange ring with brake disk to rear wheel hub	M141.5	Stage 1	Nm	200
			Stage 2	°	-

 Rear axle brake discs

Number	Designation			Model 667


BA42.10-N-1002-13D	Collar bolt, wheel flange ring with brake disc to rear wheel hub	M14 x 1.5	Nm	200

000 589 68 33 00

389 589 02 15 00

000 589 35 33 00

Internal puller

Counter stay

Drift

Repair materials

Number	Designation	Order number
BR00.45-Z-1017-01A	SV flame starting system sealant replaced by: A001 989 25 20	A 000 989 54 20