ar3320d145202a

Detaching wishbone from steering knuckle and front axle beam

Type ar · thema 33.20 · versie 0105 · 2001-08-09

Geldig voor: FRONT AXLE 730.408 /410 in MODEL 901, 902 FRONT AXLE 730.409 in MODEL 902 FRONT AXLE 730.409 /413 in MODEL 903 FRONT AXLE 730.411 /414 in MODEL 904 FRONT AXLE 732.2 in MODEL 690.6

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 2 Onderstel › 33 Vooras › 33.20 Wielophanging, naaf — Serie 690 (modellen 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 17 Aandrijflijn/as › 17.50 Vooras › 17.50.41 Dwarsgeplaatste wieldraagarm/geleidearm/stabilisator — Serie 690 (modellen 6**) · Serie 901 · Serie 902 · Serie 903 · Serie 904

Geldt ook voor motoren/versnellingsbakken: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 732 2**

AR33.20-D-1452-02A

Detaching wishbone from steering knuckle and front axle beam

Detaching wishbone from steering knuckle and front axle beam

730 589 02 33 00

Puller

Detaching wishbone from steering knuckle and front axle beam

D33.20-0021-01

1 Unscrew nut (13) on wishbone joint.

2 Press steering knuckle (10) off wishbone using puller.

Detaching wishbone from steering knuckle and front axle beam

D33.20-0020-01

3 Unscrew stop plate (7) from wishbone (12).

On versions with anti-roll bar, pull the stop plate hanging on the anti-roll bar upwards and leave hanging.

Detaching wishbone from steering knuckle and front axle beam
Detaching wishbone from steering knuckle and front axle beam

D33.20-0004-01

D33.20-0002-01

4 Undo rear screw joint on wishbone by unscrewing wishbone bolt (2).

5 Undo front screw joint on wishbone by unscrewing wishbone bolt (2).

6 Remove wishbone (12).