Removing and installing hot film mass air sensor

Type ar · thema 07.07 · versie 0106 · 1998-10-02

Geldig voor: ENGINE 104.94 /99, 111.921 /943 /944 /945 /946 /947 /96 /970 /973 /974 /975 /977 (except , 104.990)

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 1 Motor › 07 Mengselvorming › 07.07 Luchtkwantummeter, luchtmassameter

EinPAS 15 Motor › 15.45 Motormanagement › 15.45.12 Sensor/schakelaar/kabelset

Geldt ook voor motoren/versnellingsbakken: 104 94*, 104 991, 104 992, 104 994, 104 995, 104 996, 111 921, 111 943, 111 944, 111 945, 111 946, 111 947, 111 96*, 111 970, 111 973, 111 974, 111 975, 111 977

AR07.07-P-1453D

Removing and installing hot film mass air sensor

3.8.94

ENGINE 104.94 /99, 111.921 /943 /944 /945 /946 /947 /96 /970 /973 /974 /975 /977 (except , 104.990)

Removing and installing hot film mass air sensor

P07.51-0333-01

P07.51-0334-01

Right-hand illustration

Shown on engine 104
4/1 O-ring
B2/5 Hot film mass air sensor
Arrow Union nut

Left-hand illustration

Shown on engine 111.975

Arrow Union nut

P07.51-0581-01

Right-hand illustration
Shown on engine 111.945/977

4/1 O-ring
B2/5 Hot film mass air sensor

Left-hand illustration
Shown on engine 111.947

B2/5 Hot film mass air sensor

P07.51-0521-01

Fig. item, etc.	Work instructions
Arrow	Union nut, plug connection	 Installing: tighten union nut until it engages
4/1	O-ring	inspect, replace if necessary, oil to facilitate installation
B2/5	Hot film mass air sensor