AR05.00-P-2011HA | Removing, installing hydraulic valve clearance compensation elements (bucket tappets) | 23.6.97 |
ENGINE 602.982 /983
P05.00-0268-06
1 Valve clearance compensation element
2 Rubber suction cup
3 Oil passage in cylinder head
4 Seal
5 Screw plug
Arrows Oil feed drillings to the compensation elements
| Removing, installing | ||
1 | Remove camshaft | ||
2 | Pull out compensation element (1) | Installation: re-install compensation element (1) which is not replaced, at the same point. Oil compensation element (1). | |
Hydraulic valve clearance compensation elements design | |||
3 | Unscrew plug (5) and blow compressed air into the oil passage (3) | At the same time, inspect that the outlet drillings (arrows) at the seat of the valve tappet are clear. Installation: replace seal (4). | |
4 | Install in the reverse order |
Commercially available tools