ar0320p3000mcd

Replace front crankshaft radial sealing ring

Type ar · thema 03.20 · versie 0101 · 2007-09-10

Geldig voor: ENGINE 660.9 in MODEL 451.3 /4

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 1 Motor › 03 Drijfwerk › 03.20 Krukas — Serie 451 (modellen 3**, 4**) · Serie 660 (modellen 9**)

EinPAS 15 Motor › 15.15 Verbrandingsmotor compleet/krukkast/krukaandrijving › 15.15.41 Krukas/vliegwiel/koppelingsplaat — Serie 451 (modellen 3**, 4**) · Serie 660 (modellen 9**)

AR03.20-P-3000MCD

Replace front crankshaft radial sealing ring

21.8.07

ENGINE 660.9 in MODEL 451.3 /4

Replace front crankshaft radial sealing ring

P03.20-2280-11

1 Crankshaft radial seal

2 Timing case cover

Removing

1

Remove belt pulley for crankshaft

AR03.30-P-1700MCD

2

Lever crankshaft radial sealant ring (1) out of timing case cover (2) using a suitable tool

Ensure that timing case cover (2) is not damage otherwise it must be replaced.

Install

3

Clean sealing surface on timing case cover (2)

The sealing surface on the timing case cover (2) must be absolutely dust and grease-free otherwise leaks can occur.

4

Insert crankshaft radial sealing ring (1) in the timing case cover (2) and then install flush with the timing case cover (2)

The crankshaft radial sealing ring (1) must be installed dry.

5

Install crankshaft belt pulley

AR03.30-P-1700MCD

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out engine test run and check engine for leaks in area of crankshaft radial sealing ring (1)

Verwezen documenten