ar0110p2405rt

Remove/install engine cover

Type ar · thema 01.10 · versie 0100 · 2005-07-12

Geldig voor: ENGINE 113.971 in MODEL 251.075 /175

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 1 Motor › 01 Motor compleet, carterventilatie, cilinderkop, cilinderblok › 01.10 Motor compleet — Serie 251 (modellen 075, 175)

EinPAS 15 Motor › 15.15 Verbrandingsmotor compleet/krukkast/krukaandrijving › 15.15.45 Afdekking/bekleding — Serie 251 (modellen 075, 175)

Geldt ook voor motoren/versnellingsbakken: 113 971

AR01.10-P-2405RT

Remove/install engine cover

6.6.05

ENGINE 113.971 in MODEL 251.075 /175

Remove/install engine cover

P01.10-2721-07

1 Mounting clamp

2 Mounting clamps

3 Mounting clamps

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood

AR88.40-P-1000RT

2

Remove the partition wall between the wheelhouses

AR62.30-P-2400RT

3

Unclip the mounting clamps (1,2), to do this raise the engine cover slightly (arrows A)

When unclipping the engine cover, only lift gently in the area of the mounting clamps, otherwise the cover may break.

4

Unclip the mounting clamps (3), to do this, pull the engine cover slightly forwards

5

Remove engine cover

6

Install in the reverse order

Verwezen documenten