ad0716s200039b

Connection diagram, electropneumatic pressure converter, exhaust gas recirculation, testing pneumatics, CDI

Type ad · thema 07.16 · versie 0100 · 2003-06-06

Geldig voor: ENGINE 611 in MODEL 638.094 /194 /294 with CODE (MF8) Low-emission engine conforming to EU3 group 3 ENGINE 611 as of 1.11.00 in MODEL 638.094 /194 /294 with CODE (MS5) Low emission engine stage II

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 1 Motor › 07 Mengselvorming › 07.16 Dieselinspuitsysteem Common-Rail — Serie 611 · Serie 638 (modellen 094, 194, 294)

EinPAS 15 Motor › 15.45 Motormanagement › 15.45.1 Basisinformatie — Serie 611 · Serie 638 (modellen 094, 194, 294)

AD07.16-S-2000-39B

Connection diagram, electropneumatic pressure converter, exhaust gas recirculation, testing pneumatics, CDI

ENGINE 611 in models 638.094 /194 /294 with CODE (MF8) low-pollution engine in accordance with EU3 Group 3

ENGINE 611 as of 1.11.00 in model 638.094 /194 /294 with CODE (MS5) low-pollution engine stage II

Connection diagram, electropneumatic pressure converter, exhaust gas recirculation, testing pneumatics, CDI

S07.16-4122-06

Pneumatics connection diagram, vacuum from exhaust gas recirculation pressure transducer

1 Air admission filter

2 Vent line to filter

3 Vacuum input line

4 Y distributor

5 EGR valve vacuum control unit

Y44 Electropneumatic pressure converter for exhaust gas recirculation

Test description

Check electropneumatic pressure converter for exhaust gas recirculation for correct pressure control. Activation takes place with the HHT tool and reading off the actual values via the vacuum tester.

Test connections

Connect the vacuum tester with Y-distributor unit between the pressure transducer Y44 and vacuum control unit for exhaust gas recirculation valve.

Execution of the test

1 Engine running

2 Actuate pressure transducer via the HHT and read off the display on the vacuum tester.