S07.16-4072-10
a Relay
b Multimeter
1 to circuit 30
2 to circuit 31
Test description
This is a check of the relay contacts. For this purpose the contacts are checked using the Multimeter in the excited and non-excited state of the coil.
Test connections
1 Connect the Multimeter for measurement of resistance to Pin 30 and 87 of the relay.
2 Put Pin 86 to ground.
3 Connect a cable to Pin 85.
Carry out the test
1 Connect the cable connected to Pin 85 of the relay to circuit 30 and read off the display on the Multimeter
2 Disconnect the cable connected to Pin 85 of the relay and read off the display on the Multimeter.