SM83.70-P-0004-01B | Retrofitting fuel line | Model 463 with ENGINES 112.945, 113.962 with CODE (H12) auxiliary heater Wheelbase 2400 |
P83.70-3125-01
1 Position cable fastener with hose bracket (9) on cross member, rear right.
P83.70-3082-01
2 Bore out bracket (10) to 6 mm and place on mount (arrow) from heat shield of exhaust system.
3 Secure fuel line with rubber mount in clamp (11).
P83.70-3083-01
4 Place hose bracket with clamp (12) on hand brake cable protection hose.
P83.70-3085-01
5 Detach mat holders and replace with clamps (14, 15 and 16) with washers.
6 Install fuel line (8) from rear, along underfloor to the front and between firewall and heat shield to heater unit (A6).
P83.70-3086-01
P83.70-3087-01
P83.70-3088-01
7 Connect fuel line with hose (18) on heater unit (A6) and secure with hose bracket with clamp (17) to pipe line.
P83.70-3125-01
8 Fit fuel line (6) from fuel metering pump to fuel line (8).
Do not shorten fuel line (8), instead make a loop with excess length and secure on tubular frame cross member.