Operation no. of the operation texts or standard texts and flat rates | |||||
Category | Op. no. | Operation text | Time | Acc. no. | Code |
N | 027979 | Replace carrier for A/C compressor | 1,1 h | 83 941 51 | KLIMAKOMP |
1 | Bolts |
2 | Refrigerant lines |
3 | Bracket |
4 | Refrigerant compressor |
5 | Bolts |
W83.55-1047-05
6 | Bolts |
7 | Carrier |
W83.55-1048-05
| Remove/install | ||
1 | Switch off ignition | ||
2 | Remove soundproofing below the engine | ||
Danger ! | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
3 | Relieve poly-V belt and remove from belt pulley of A/C compressor (4) | ||
| |||
Do not remove poly-V-belt. | |||
4 | Remove screws/bolts (1) and remove the retaining clamps for the refrigerant lines (2) from the bracket (3) | ||
5 | Remove bracket (3) | ||
6 | Disconnect electrical connector for magnetic clutch of A/C compressor (4) | Installation: Replace cable tie. | |
7 | Remove screws/bolts (5) from A/C compressor (4) | Screw/bolt, A/C compressor to carrier | |
8 | Remove A/C compressor (4) with connected refrigerant lines (2) | Fasten A/C compressor (4) using wire to a suitable position. | |
9 | Remove screws/bolts (6) and remove carrier (7) | With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system. | |
Installation: Install new carrier (7) using new screws/bolts (6). | |||
Screw/bolt, A/C compressor carrier to crankcase | |||
10 | Install in the reverse order |
참조 문서
- ar1322w0003a 알터네이터의 V 벨트 탈, 장착
- as0000z000101a 프리텐셔닝된 스프링 또는 스프링 장치에서 작업 시 끼이거나 눌려서 입을 수 있는 상해 위험