2 | Tie-down rail warning adhesive label |
6 | Tie-down rail warning adhesive label |
S60.30-A003-76
S60.30-A004-79
1 | Edge | 4 | Left dropside | a | Dimension (approx. 50 mm) | ||
2 | Tie-down rail warning adhesive label | 5 | Edge | ||||
3 | Platform inlay | 6 | Tie-down rail warning adhesive label |
We would like to notify you of the following:
It must be ensured that the tie-down rail warning adhesive labels (2, 6) contained in the tie-down rail parts kit are put in a visible position.
Tie-down rail warning adhesive label (2) at platform inlay (3):
Align and glue on tie-down rail warning adhesive label (2), as shown, parallel under the edge (1) of the platform inlay (3) in a visible area.
Observe dimension (a) with approx. 50 mm.
Tie-down rail warning adhesive label (6) at left dropside (4):
Align and glue on tie-down rail warning adhesive label (6), as shown, parallel under the edge (5) of the left dropside (4) in a visible area.
Glue on tie-down rail warning adhesive label (6) at left dropside (4) in a visible area once all accessory parts have been installed.
Otherwise, the retrofitted accessory parts may cover the tie-down rail warning adhesive label (6).
Clean the bonding areas of the tie-down rail warning adhesive labels (2, 6) thoroughly with a cleaner suitable for plastic and paint.
Otherwise adhesion problems at the bonding areas can occur.