PE83.70-P-2000-60D | Legend for wiring diagram of stationary heater (STH) | MODEL 463 with ENGINE 112.945 up to 31.5.98 with CODE (H12) Auxiliary heater |
Item | Designation | Coordinate |
A2/27 | Stationary heater antenna | 19L |
A2/27x1 | Stationary heater (STH) antenna connector | 18G |
A6 | Stationary heater/heater booster unit | 15B 23B |
A6b1 | Temperature sensor | 22D |
A6m1 | Circulating pump | 23D |
A6m2 | Combustion air blower | 24D |
A6r1 | Combustion air blower preresistor | 20D |
A6r2 | Glow pin | 21D |
E9/1 | Heater control illumination | 5F 30E |
E15/2 | Front dome lamp (with shut-off delay and front reading lamp) | 26B |
F1 | Fuse box | 12D 34D |
F1f9 | Fuse 9 | 35D |
F1f10 | Fuse 10 | 34D |
F1f20 | Fuse 20 | 13D |
F1f21 | Fuse 21 | 12D |
K16 | Stationary heater relay module (terminal 15/30) | 11F |
M2 | Blower motor | 2L |
M2/4 | Air flap actuator motor (fire wall) | 27L |
M2/4x1 | Air flap actuator motor (firewall) connector | 26J |
N34 | Stationary heater timer | 9B |
N34v1 | "Gray" diode - stationary heater in operation | 10B |
N34v2 | "Yellow" diode - preselected time activated | 9B |
R14 | Blower motor preresistor group | 1F |
S2/1 | Ignition/starter switch | 35B |
S3 | Blower switch | 6L |
S24/1 | Warm/cool air switch (Heating systems) | 25E |
S46/7 | STH microswitch | 16L |
S76 | Differential lock switch group | 32L |
W12 | Ground (center console) | 1H 10H 14E 16H |
W29/7 | Ground (steering column) | 4L 27B |
W30 | Ground (frame) | 23G |
X6 | Terminal block (circuit 58) (2-pin) | 3L 9H 28B |
X11/4 | Data link connector (DTC readout) | 24L |
X12/3 | Terminal block (circuit 30, 15, 61) (3-pin) | 12B |
X31/4 | Blower switch connector | 33G |
X59/5 | Bypass connector (3-pin) | 20G |
X74 | Main harness/fuel metering pump connector (2-pin) | 22J |
X92/3 | Frame connector (22-pin) | 22H |
Y16 | Bypass solenoid | 21L |
Y23 | Stationary heater fuel metering pump | 23L |
Z3/22 | Circuit 15 connector sleeve (fused, F1f9) | 35F |