GF82.95-P-2000P | TELE AID switch-on/switch-off characteristics, function | 1.12.99 |
MODELS 203, 210,
220 up to 31.8.03
with CODE (855) TELE AID
with CODE (930) Taxi emergency call
MODELS 208.3,
215 up to 31.8.03 with CODE (855) TELE AID
TELE AID switch-on characteristics emergency call
The TELE AID emergency call system is switched on by turning the key in the starter switch to position 1 or 2. The switch-on procedure is indicated by the indicator lamp flashing (4 sec.) in the SOS pushbutton switch (S93/3) . Moreover, the D2B telephone and TELE AID transmitter/receiver (A35/17) waits for a ready confirmation from the restraint system control unit (N2/7). The system is operational as soon as the ready confirmation is received. If the system is not authorized an error message appears in the instrument cluster (A1), the system is not operational and the indicator lamp in the SOS pushbutton (S93/3) illuminates.
-----------------------------------------------------------------------------------------
TELE AID switch-on characteristics telediagnosis
The TELE AID telediagnosis system is always ready for operation, even when the key in the starter switch is in the 0 position, and the telediagnosis pushbutton switch on the telephone handset (A34) has been pressed correspondingly. The telephone must be switched on (stand-by mode) and the TELE AID telediagnosis system must be authorized.
If the system is not authorized an error message appears in the instrument cluster (A1) and the system is not operational.
-----------------------------------------------------------------------------------------
TELE AID switch-off characteristics emergency call
The TELE AID emergency call is switched off when the starter switch is in position 0, no emergency call is active and the telephone is not set to shut-off delay.
For control of the telephone system TELE AID remains also active during the telephone shut-off delay, however, it is not possible to trigger an emergency call .
During a call TELE AID is only then switched off when the emergency call is terminated.
If an authorization is in progress while switching off, the authorization is interrupted and TELE AID switched off.
The telephone system can be set to power-down in order to continue a telephone conversation for a certain time in spite of "Circuit 15R: OFF".
TELE AID switch-off characteristics telediagnosis
When the telephone is switched off TELE AID telediagnosis is deactivated.
TELE AID block diagram | |||
Authorization, function | |||
Status indicator (indicator lamp), function | for TELE AID emergency call | ||
Transmitter/receiver unit, location/task/design/function | for telephone and TELE AID | ||
TELE AID pushbutton, location/task/design/function | for TELE AID emergency call | ||
for TELE AID telediagnosis |