P80.30-0226-06
1st version up to 11/94,
up to 08/95
1 Remote control key
A26/1 Driver door infrared remote control (IR) receiver unit
P80.30-0227-06
A26/3 Trunk lid infrared remote control (IR) receiver unit
N54 RCL control module
P80.30-0270-06
2nd version as of 12/94,
as of 09/95
1 Remote control key
A26/7 RCL receiver (interior rear view mirror)
E34 RCL function indicator except
N54 RCL control module
b Red feedback lamp
c Green feedback lamp
P80.30-0200-01
Remote control key
An infrared transmitter with transmitter window (a), a pushbutton for operation (b), a battery compartment (c) with 4 batteries (remote control key up to 09/93) or 2 batteries (remote control key as of 10/93) and a folding 2-track key (d) are accommodated in the key head. The key can be folded out by operating pushbutton (e).
If a remote control is lost, this can be ordered via the usual channels by stating the locking mechanism number.
Up to 8 transmitters can be adapted to a locking mechanism by the manufacturer. The folding key in the transmitter is replaceable.
If the transmitter button (b) is operated continuously, the transmitter switches off after approx. 30 s in order to prevent the batteries discharging.
As of 10/93, the volume of the remote control key was reduced by approx. 40%. It is not possible to fit the mechanical key shank of a remote control key up to 09/93 in a remote control key as of 10/93.
1 Remote control key up to 09/93
2 Remote control key as of 10/93
Spare infrared key and auxiliary key function
As of 05/95 the customer receives a spare infrared key in addition to his two infrared remote control keys (except ). With the introduction of this spare infrared key, the spare batteries for the infrared remote control key, enclosed in the car document pocket as of the introduction of the stage 2 drive authorization system, are no longer required. The spare infrared key can also be obtained from the Germersheim CSD for older vehicles with infrared remote central locking.
P80.30-0252-01
The spare key (2) is the size of a cheque card. The central locking and the ATA can be operated with the spare key. The drive authorization system can also be activated or deactivated via the infrared transmitter signal. The convenience feature cannot be operated. An infrared transmitter, a pushbutton (b) for operating, a light-emitting diode (a) to check the batteries, a battery compartment with two batteries (the same as in the standard remote control key) and a manual main key (d) are located in the spare key (2). The infrared beam is emitted when the pushbutton (b) in the center of the front side of the spare key is operated.
P80.30-0253-01
Spare keys are identified by a code number (3 in this case) stamped in the back of the key.
The battery compartment lid (c) must be removed from the spare key (2)
to change the two batteries (f). To do this, press in the catch (arrow). The same two batteries are used as in the standard infrared remote control key.
If necessary, the manual main key(d) can be replaced by a manual auxiliary key. This can be obtained from the Germersheim Central Supply Depot. The lock cylinder on the trunk and glove box cannot be operated with the manual auxiliary key. This means the customer continues to have the usual advantages when staying at a hotel or visiting a workshop.
P80.30-0230-01
Infrared remote control receiver units (A26/1, A26/3) up to 11/94, up to 08/95
From outside, only the infrared window (a) and the two feedback lamps, red (b) and green (c) of the receiver units are visible.
A26/1 Driver door infrared remote control (IR) receiver unit
P80.30-0228-01
The trunk lid infrared remote control (IR) receiver unit (A26/3) is mounted on the rear lock.
P80.30-0218-01
Infrared remote control receiver units (interior mirror) (A26/7) as of 09/95
The receiver unit (A26/7) and the two feedback lamps red (b) and green (c) are located on the interior mirror.
The receiver units can be replaced individually without stating the locking mechanism number.
P80.30-0271-01
RCL function indicator (E34)
There are no receiver units in the driver's door handle, only green and red feedback lamps (not ).
b Red feedback lamp
c Green feedback lamp
P80.30-0229-01
Infrared remote control module (N54) up to 11/94, up to 08/95
The control module is located on the control module panel in the trunk. The electrical connection is provided with an installation and removal aid. To withdraw, press locking lug and pull up coupling on the cable side.
When replacing the control module or the transmitter, always indicate the locking mechanism number since both parts are matched to one another.
P80.30-0223-01
Infrared remote control module (N54) as of 12/94, as of 09/95
The control module is located on the foot panel in the front passenger's footwell. The 12-pin electrical connection is provided with an installation and removal device. To remove, press the stop notch and fold the clip over. The 2-pin electrical connection is secured with a locking device. To remove, press the stop notch and push the locking device to one side.