Fuel tank position/design/function

GF47.10-P-3000E

17.12.96

MODEL 202.0, 208

15.03.07

The document has been updated to this date

and will no longer be subject to revision.

P47.10-0370-05

Design

80 Fuel tank

90/4 Feed line

90/6 Degasing connection/fuel pump return flow

95/1 Left suction spray pump

95/2 Right suction spray pump

Fuel tank position	The fuel tank (80) is positioned at the frame floor ahead of the rear axle because of the through-loading facility (from trunk into passenger compartment)
Fuel tank design	Because of the U-shaped recess, the fuel tank (80) is split into two chambers. The chambers are connected in the upper half. Splash bowl (80/5), connection lines from the left to the right fuel chamber, closing plate with fuel gage sensor, drain valves and suction spray pumps (95/1) and (95/2) are installed in the bottom area
Fuel tank function		GF47.10-P-3000-01E
Fuel gage sensor (B4) position/task/design/function		GF47.10-P-3001H
Drain valves task/design/function		GF47.10-P-3100H
Splash bowl position/task/function		GF47.10-P-3101E
Suction spray pump position/task/design/function		GF47.10-P-3102E
Closing plate task/design		GF47.10-P-3103H
On-board refueling vapor recovery function	 as of MY 98	GF47.10-P-3004B