bt3530d000601a

Drive pinion end face machining changed

유형 bt · 주제 35.30 · 버전 0104 · 2009-01-19

적용 대상: REAR AXLE 741.130 /131 /40 /43 /52 /530 /540 /55 ab 01/97 sowie als Ersatzteil eingebaute Antriebskegelräder ab 01/97 REAR AXLE 741.412 /413 /414 /415 /416 /420'

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 35 뒷차축 › 35.30 구동장치, 구동축

EinPAS 17 드라이브 트레인/액슬 › 17.51 뒤차축 › 17.51.65 뒤차축 기어/액슬 드라이브 샤프트

엔진/변속기에도 적용: 741 130, 741 131, 741 40*, 741 412, 741 413, 741 414, 741 415, 741 416, 741 420, 741 43*, 741 52*, 741 530, 741 540, 741 55*

BT35.30-D-0006-01A

Drive pinion end face machining changed

REAR AXLE 741.130 /131 /40 /43 /52 /530 /540 /55
ab 01/97 sowie als Ersatzteil eingebaute Antriebskegelräder ab 01/97

REAR AXLE 741.412 /413 /414 /415 /416 /420

Drive pinion end face machining changed

D35.30-0112-01

The end-face surface-grinding on these drive pinions is discontinued, notches and material accumulations remaining on the end face which lead to measurement errors in the case of repair .

Therefore dress the end with a grindstone before measurement.