bt0941w000201a

Intermediate piece from charge air housing to turbocharger altered

유형 bt · 주제 09.41 · 버전 0101 · 2009-02-16

적용 대상: ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954 ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954 ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001 ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 09 공기흡입, 차징 › 09.41 차지 에어 튜브/차지에어 냉각장치 — 시리즈 000 (모델 001) · 시리즈 942 (모델 9**) · 시리즈 950 · 시리즈 952 · 시리즈 953 · 시리즈 954

EinPAS 15 엔진 › 15.30 흡기/충전 › 15.30.33 흡기 매니폴드/급기 매니폴드 — 시리즈 000 (모델 001) · 시리즈 942 (모델 9**) · 시리즈 950 · 시리즈 952 · 시리즈 953 · 시리즈 954

엔진/변속기에도 적용: 541 9**, 542 9**, 941 9**

BT09.41-W-0002-01A

Intermediate piece from charge air housing to turbocharger altered

ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954

ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954

ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001

ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Intermediate piece from charge air housing to turbocharger altered

W09.40-1078-11

Material and form of the intermediate piece altered

The intermediate piece (1) (rubber wrapped) was altered to be an intermediate piece (2) made out of die-casting (GD-AlSi) or permanent mold casting (GK-AlSi). Two sealing rings (3) were also mounted in the altered intermediate piece (2).

Sealing of the oil pressure line from the turbocharger to the charge air housing has been improved by this alteration.

If wear occurs on intermediate piece (1) then it will be replaced by intermediate piece (2) with sealing rings (3).