Knife
000 589 12 28 00
D83.70-0113-01
1 Sever fuel feed line (1) of vehicle engine upstream of the fuel filter and separate out approx. 50 mm of line.
2 Produce two equal size connector hoses from one 100 mm fuel hose piece.
3 Insert support sleeves (6) in the ends of the fuel feed line (1).
4 Connect T-tube piece (3) to the severed feed line with the prefabricated connector hoses (2).
The connection for the water heater at the T-tube piece must point vertically downwards.
5 Connect fuel intake line (4) for the water heater with a connector hose (5) to the T tube piece (3) and cut to length using the fuel connecting pipe of the water heater as a guide.
6 Connect fuel intake line to the water heater with a connector hose.
Ensure wiring is routed without chafing. Tie up fuel intake line and attach chafe protection if necessary.