az8285w200601b

Connect and install FleetBoard vehicle computer

유형 az · 주제 82.85 · 버전 0101 · 2007-03-08

적용 대상: MODEL 940, 942, 943, 944 with BODY 944.890 with CODE (DD5) Cab with high roof with CODE (EX8) Preinstallation for distance-related toll calculation except CODE (EX3) Telematics preinstallation MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890 with CODE (DD5) Cab with high roof with CODE (EX8) Preinstallation for distance-related toll calculation except CODE (EX3) Telematics preinstallation MODEL 970, 972, 974, 975, 976 with BODY 972.890 with CODE (DD5) Cab with high roof with CODE (EX8) Preinst

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.85 네비게이션 및 통신시스템 — 시리즈 375 (모델 3**, 4**, 820, 860) · 시리즈 940 · 시리즈 942 · 시리즈 943 · 시리즈 944 · 시리즈 950 (모델 5**, 6**) · 시리즈 952 (모델 5**, 6**) · 시리즈 953 (모델 6**) · 시리즈 954 (모델 5**) · 시리즈 970 · 시리즈 972 · 시리즈 974 · 시리즈 975 · 시리즈 976

EinPAS 31 커뮤니케이션/정보/엔터테인먼트 › 31.20 플리트 매니지먼트 시스템/포지셔닝 › 31.20.3 추가 장착/개조 — 시리즈 375 (모델 3**, 4**, 820, 860) · 시리즈 940 · 시리즈 942 · 시리즈 943 · 시리즈 944 · 시리즈 950 (모델 5**, 6**) · 시리즈 952 (모델 5**, 6**) · 시리즈 953 (모델 6**) · 시리즈 954 (모델 5**) · 시리즈 970 · 시리즈 972 · 시리즈 974 · 시리즈 975 · 시리즈 976

AZ82.85-W-2006-01B

Connect and install FleetBoard vehicle computer

Connect and install FleetBoard vehicle computer

W82.85-1449-11

1 Insert installation frame for FleetBoard vehicle computer (4) into upper slot of assembly frame (dual DIN slot) (3).

The installation frame for the FleetBoard vehicle computer (4) latches automatically into the assembly frame (dual DIN slot) (3).

Connect and install FleetBoard vehicle computer

W82.85-1451-11

2 Connect the FleetBoard vehicle computer wiring harness (8) to the FleetBoard connector (X126).

3 Cut GPS antenna line (5) and GSM antenna line (6) to the length of the wiring harness for the FleetBoard vehicle computer (8) and secure to electrical lines using cable ties (arrows) on either side of FleetBoard connector (X126).

Connect and install FleetBoard vehicle computer

W82.85-1452-11

4 Route GPS antenna line (5), GSM antenna line (6) and the wiring harness for the FleetBoard vehicle computer (8) through the upper slot of the assembly frame (dual DIN slot) (3).

5 Slide assembly frame (dual DIN slot) (3) into installation opening.

Insert the assembly frame (dual DIN slot) (3) into the guides (arrows). The assembly frame (dual DIN slot) (3) must latch into the installation opening.

Connect and install FleetBoard vehicle computer

W82.85-1574-11

6 Connect GPS antenna line (5) and GSM antenna line (6) to FleetBoard vehicle computer (2).

Pay attention to color coding.

7 Connect FleetBoard vehicle computer connector (P502) of FleetBoard vehicle computer wiring harness (8) to FleetBoard vehicle computer (2).

The designation of the FleetBoard vehicle computer connector (P502) is found on both the wiring harness for the FleetBoard vehicle computer (8) and the FleetBoard vehicle computer (2).

8 Slide FleetBoard vehicle computer (2) into assembly frame (dual DIN slot).

Check the FleetBoard vehicle computer (2) is correctly latched into the assembly frame (dual DIN slot).